View Full-text

pISSN : 1598-706X / eISSN : 2288-8381


(논문)연구논문

한국주조공학회지 (24권4호 231-237)

Effect of Soaking Temperature on the Bake Hardnability of Ti-Nb Stabilized Steel Sheets

Ti-Nb 복합 첨가강의 BH특성에 미치는 균열온도의 영향

Bo-Young Hur, Yong-Su Um, Sang-Youl Kim, Sang-Hun Cho, Tae-Woon Nam*

Gyeongsang Nat. Univ., *Hanyang Univ.

Abstract

Bake hardenable steel utilizes the phenomenon of strain aging to provide an increase in the yield strength of formed com- ponents. An increase of the carbon content will improve the bake hardening response: more solutes are available to pin mobile dislocations and to form the clusters more rapidly. But aging resistance decrease as increasing solute carbon. In order to under- stand the compatibility between bake hardenability and aging resistance. The optimum solute carbon control methods during manufacture should be determined. In this paper, the effect of continuous heat cycle conditions such as soaking temperature, rapid cooling start temperature, cooling rate on BH(Bake Hardenability), AI(Aging Index), YP~E1(Yield Point Elongation) and other mechanical properties have been investigated. and following results were obtained. In the case of soaking temperature, BH increases with higher soaking temperature because of NbC dissolution(830°C), Therefore the solute carbon and BH at 850°C and 870°C are higher than these at 8 10°C. But BH at 870°C is a little lower than that at 850°C owing to the ferrite grain size. The mea- surement of amount of dissolution C using IFT(Internal Friction Test) can explain the relation of solute carbon and BH.

Keywords

bake hardenability, aging index, NbC, soaking temperature.