pISSN : 1598-706X / eISSN : 2288-8381
한국주조공학회지 (32권1호 24-31)
Fabrication of Thin Plate of Semisolid Material using Slope Plate Process and Development of Fabrication Apparatus
Slope plate 공법을 이용한 반응고 박판 및 제조 장치 개발
Koo-Ja Yoon, Jung-Woon Bae, Chul-Kyu Jin, Chung-Gil Kang*
Graduate School, Pusan National University, *Pusan National University
In this study, semi-solid thin plate of A 356 aluminum alloy was fabricated by using slope plate apparatus and vacuum pressurization. Slope plate was used to produce semi-solid material with spheroidal microstructures. After molten metal was poured into the slope plate connected to the pouring hole of die, semi-solid material flowed into the die cavity by vacuum degree. The primary crystals of the cast metal became spheroidal. In order to increase the working pressure, gas pressurization of U shape was designed for fabrication of thin plate. For 3 bar of gas pressure and 60 mmHg of vacuum degree, thin plate was fabricated without defects on surface.
Slope plate, Vacuum pressurization, Bipolar plate, Semi-solid, A356 alloy.
PDF